CBB22 金属化聚丙烯薄膜电容器
| 产品说明： |
| 采用金属化聚丙烯薄膜无感式卷绕、阻燃环氧粉末包封、 镀锡铜线引出，具有防潮能力强、自愈性好、高绝缘、 低损耗等特点。适用于LED灯、点火及高频电路中。 |
典型线路图：
GB10190﹑IEC 60384-16 | ||
气候类别 | 40/85/21 | |
额定电压 | 250VDC～630VDC | |
容量范围 | 0.1μF～10μF | |
容量偏差 | ±5%(J)、±10%(K) | |
耐电压 | 极间 | 1.6*UR(VDC)/10s |
绝缘电阻(20℃) | 极间 | ≥30000MΩ, CR≤0.33μF (100Vdc,60s) |
极壳 | ≥100000MΩ ( 100Vdc,60s) | |
损耗角正切 (20℃) | ≤0.002 (1KHz ) | |
| 常用规格（Unit：mm） | |||||||||||||||
Rated Cap. | 250/275VDC | 400VDC | 630VDC | ||||||||||||
L | W | H | P | Фd | L | W | H | P | Фd | L | W | H | P | Фd | |
0.10μF | 18 | 6.5 | 12.5 | 15.0 | 0.8 | 18 | 6.5 | 12.5 | 15.0 | 0.8 | 18 | 6.5 | 12.5 | 15.0 | 0.8 |
0.15μF | 18 | 6.5 | 12.5 | 15.0 | 0.8 | 18 | 6.5 | 12.5 | 15.0 | 0.8 | 18 | 7.5 | 14.0 | 15.0 | 0.8 |
0.22μF | 18 | 6.5 | 12.5 | 15.0 | 0.8 | 18 | 6.5 | 12.5 | 15.0 | 0.8 | 18 | 9.5 | 15 | 20.0 | 0.8 |
0.47μF | 23 | 7.0 | 14.5 | 20.0 | 0.8 | 23 | 7.0 | 14.5 | 20.0 | 0.8 | 23 | 9.5 | 17.5 | 20.0 | 0.8 |
0.56μF | 23 | 7.5 | 15 | 20.0 | 0.8 | 23 | 7.5 | 15 | 20.0 | 0.8 | 23 | 10.5 | 18 | 20.0 | 0.8 |
0.68μF | 23 | 8.0 | 16 | 20.0 | 0.8 | 23 | 8.0 | 16 | 20.0 | 0.8 | 23 | 11.5 | 19 | 20.0 | 0.8 |
0.82μF | 24 | 7.0 | 14.5 | 20.0 | 0.8 | 23 | 9.0 | 16.5 | 20.0 | 0.8 | 23 | 12.5 | 20 | 20.0 | 0.8 |
1.0μF | 24 | 7.5 | 15.5 | 20.0 | 0.8 | 23 | 10 | 17.5 | 20.0 | 0.8 | 23 | 14 | 21.5 | 20.0 | 0.8 |
1.2μF | 24 | 8.5 | 16.0 | 20.0 | 0.8 | 23 | 11 | 18.5 | 20.0 | 0.8 | 29.5 | 13 | 21 | 26.0 | 0.8 |
1.5μF | 24 | 9.5 | 17.0 | 20.0 | 0.8 | 23 | 12 | 20 | 20.0 | 0.8 | 29.5 | 14.5 | 22 | 26.0 | 0.8 |
2.0μF | 24 | 10.5 | 18.5 | 20.0 | 0.8 | 23 | 14 | 22 | 20.0 | 0.8 | 29.5 | 17 | 25 | 26.0 | 0.8 |
2.5μF | 24 | 12 | 20 | 20.0 | 0.8 | 29.5 | 13 | 21 | 26.0 | 0.8 | 29.5 | 19 | 27 | 26.0 | 0.8 |
3.0μF | 24 | 13.5 | 21 | 20.0 | 0.8 | 29.5 | 14.5 | 22 | 26.0 | 0.8 | 35 | 18.5 | 26.5 | 31.0 | 0.8 |
3.5μF | 24 | 14 | 21.5 | 20.0 | 0.8 | 29.5 | 15 | 23 | 26.0 | 0.8 | 35 | 20.5 | 28.0 | 31.0 | 0.8 |
评论
Comment
